First of all, is to pay attention to the daily maintenance:

In a washing cycle after the clean up button collection, in order to reduce the burden of pump, prevent pump, extended pump life. For every three washing cycle, should clean up cilia collector, in order to improve the drying wind flow, shorten drying time. The reduced cilia in recovery condenser on the attachment, reduces to the recovery condenser corrosion;

The daily check three pneumatic component, the water discharge to prevent moisture from entering the electromagnetic valve and air valve, makes them early damage. When the oil level is insufficient lubricating oil, to ensure that each bearing lubrication sufficient, prolonging service life of a bearing.

③always check the filters work pressure, when the pressure reaches or exceeds1.5 2KG/ cm, should clean the filter. To reduce the pump outlet pressure and prolong the life of each distillation,5- 8, clearing a distillation box so as to improve the rate of distillation, but also to reduce the sludge on the bottom of the corrosion, reach to extend the life of the distilling box;

In two, the second is to make stage maintenance ( usually every month for a stage ):

①check washing machine belt tension, to ensure the normal washing speed and drying speed, view the belt wear, timely replacement. Check Di Di solvent pH pH value decreased, if found, should be adjusted in time to prevent the washing machine corrosion, thereby prolonging the service life of dry cleaning machine.

The thorough cleaning machine all cilia cilia, prevent blocking air channel, reduce cilia adsorption of dirt on machine corrosion; check the hydrophobic valve performance, and clean steam pipeline and cooling water pipeline filter in order to improve the efficiency of the machine, saving energy. Check and clean the solvent pump, preventing clogging in the pump in the dirt and wear the impeller of the pump, and the pump outlet pressure is increased, the seal is damaged.

In three, annual maintenance work also nots allow to ignore. (annual washing machines need thorough maintenance below):

①thoroughly clean the attachment in the coil pipe, heating coil and the airflow passage cilia, to improve drying recovery efficiency, reduce the corrosion of the dirt on the machine.

The discharge and clean the oil water separator, so as to ensure the normal separation of oil and water.

The distillation condenser cleaning and related lines, preferably with baking soda and water washing, dry cleaning oil to neutralize acid, prolong the service life of the machine.

The thorough cleaning solvent tank, will be deposited in the bottom box dirt thoroughly cleaned, to ensure that the dry cleaning oil quality, prolong the service life of the machine.