功能及特点:
1、RP60热熔胶喷胶机胶箱内层表面采用氟龙涂层防止炭化,确保胶质最佳状态,减少堵塞。
2、独立泵转速由交流马达(变频调速)数字显示精确控制胶量输出。
3、双层过滤去除染污,防止喷头堵塞。
4、系统冷启动延迟装置,防止泵的损坏。
5、RP60热熔胶喷胶机具有超高温保护功能。
热熔胶性能:
热熔胶在常温下呈固体状,加热到一定温度熔融成液体状,喷涂在被粘物后,经压合、冷却,能在几秒钟内就完成粘合过程。
热熔胶为100%的固体成份,不含溶剂,无污染;固化时间快、效率高、成本低、粘力强等特点。
应用范围:
RP60热熔胶喷胶机主要适用于过滤器车灯等行业。
技术参数:
储 存 容 量 |
60kg |
接 喷 头 数 量 |
1-4条 |
熔 胶 速 度 |
60kg/h |
胶 机 长 度 |
1000 |
最大 出胶量 |
60kg/h |
胶 机 宽 度 |
820 |
功 率 |
12kw |
胶 机 高 度 |
1000 |
控 温 范 围 |
50-230℃ |
|
此数据是胶粘度在3000CPS时以EVA胶所测得。 |
RP60 Hot Melt Adhesive Spraying Machine
Main characteristic
1. The surface of glue melting oven is coated with the Teflon antisticking layer, efficacious prevent the hot melt adhesive against carbonization,to insure the adhesive in the beststate and reduce blockage.
2. The gear pump adopts frequency conversion which accurate control adhesive capacity output.
3. Double filter can eliminate impurity to prevent the spray head from blockage.
4. The system with cooling device can prevent the pump from damage.
5. The system with temperature protection function can prevent the device from damage.
Range of application
Model RP130 Hot Melt Adhesive spraying Machine is suitable for Filter ,car lamp and on.
Technical parameters:
Lay incapacity |
60kg |
Quantity of spraying heads |
1-4bars |
Spraying speed |
45kg/h |
length |
1000 |
Max.output of glue |
60kg/h |
width |
820 |
Power |
12kw |
height |
1000 |
Range of temperature control |
50-230℃ |
|
This data is measured by EVA glue with the stickness of 3000CPS |